{"id":999,"date":"2022-08-02T18:10:40","date_gmt":"2022-08-02T18:10:40","guid":{"rendered":"https:\/\/chloride-batteries.com\/?page_id=999"},"modified":"2022-08-17T12:55:49","modified_gmt":"2022-08-17T12:55:49","slug":"faq","status":"publish","type":"page","link":"https:\/\/chloride-batteries.com\/en\/faq\/","title":{"rendered":"Frequently-Asked Questions"},"content":{"rendered":"\t\t
Frequently-Asked Questions<\/span><\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t The three main functions of the automotive battery are to:<\/strong><\/u><\/p> 1.\u00a0\u00a0\u00a0\u00a0\u00a0Supply power to the starter and the ignition system so that the engine can be cranked and started.<\/p> 2.\u00a0\u00a0\u00a0\u00a0\u00a0Supplement the charger system when load requirements exceed the supply capability of the alternator.<\/p> 3.\u00a0\u00a0\u00a0\u00a0\u00a0Act as a voltage stabilizer in the electrical system. The battery smoothies out or reduces temporarily the high voltages which may occur in the system, thereby protecting voltage sensitive components<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t Failure happens when the charge controller fails.<\/p><\/li> Battery gets overcharged and failure of various electrical components in the car.<\/p><\/li><\/ul><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t Fill each cell up to an upper level which is battery grade sulfuric acid of Sp Gr.1.260+0.01@25C.<\/p><\/li> For better activation cranking, allow the battery to stand 20 minutes after filling.<\/p><\/li> Keep the battery surface clean and dry.<\/p><\/li> Protects terminals with petroleum jelly to prevent corrosion.<\/p><\/li> Check electrotype level periodically and acid only distilled water to restore the upper level.<\/p><\/li> Ensure that cable clamps are fixed tightly.<\/p><\/li> Before filling the battery, check the electrical system of the vehicle.<\/p><\/li> Check the charging system periodically and be sure that the battery gets proper charging.<\/p><\/li><\/ul><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t Do not remove the sealing tape on the vent plug until the battery is ready for filling acid.<\/p><\/li> Do not overfill acid above the upper level.<\/p><\/li> When you try to fix the cable clamps to the terminal posts, prevent strong hitting on the posts.<\/p><\/li> Never add acid to restore the upper level.<\/p><\/li> Keep away explosive materials \/gases from the battery.<\/p><\/li><\/ul><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\tThe reason for Insufficient Charging:<\/strong><\/b><\/u><\/h3>
When too much voltage occurs, you should do the things below:<\/b><\/h3>
When too much voltage occurs, you should not do the things below:<\/b><\/h3>